Showing all 9 results

Show sidebar

FLUXUS F501

The Ideal Solution for the Water Industry

Designed for the needs of the Water Utilities sector

The FLUXUS F501 is FLEXIM's solution for many flow metering applications found in the potable water distribution sector and adjacent industries. The FLUXUS F501 offers a precise bi-directional flow measurement over a wide turndown ratio - not only at high, but especially at low flow velocities. Due to its matched and paired transducers, it also guarantees a superior zero stability. Whereas the standard FLUXUS F501 comes with water-tight IP67 transducers, the product variant FLUXUS F501IP is equipped with a set of IP68 transducers. The F501IP is thus the ideal solution for subsurface installations. With the transducers residing inside the stainless steel VARIOFIX C fixture,  the measurement system is optimally protected  and a long lifetime ensured. As of its high repeatability, the FLUXUS F501 also offers the possibility for leak detection. Especially at night, when temperatures are more even and only low flow velocities are common in drinking water lines, leakages can clearly be identified and such reading transferred to a process control system.

The ideal retrofit solution for water pipes

As a non-invasive clamp on flow meter, the FLUXUS F501 is the ideal solution for retrofitting in existing networks. As there is no need for interruption of supply lines and costly shaft constructions, it is thus also the much more cost effective solution in comparison to conventional metering technologies such as magnetive inductive meters. Due to the non-invasive technology, no cutting or welding work is needed to mount the transducers on the pipe. During installation, the flow meter's user interface is automatically adapted to the connected transducers and no zeroing is necessary. Water is already pre-selected as medium and it's physical properties are stored in the flowmeter's memory. In most cases only the pipe's outer diameter and wall thickness as well as the water temperature has to be entered in order to start the measurement. The commissioning work is thus reduced to a minimum. On request, the instrument can even be pre-configured at the factory.

FLUXUS F601

The Portable Flowmeter for any medium

Unmatched in Performance -The portable liquids Flowmeter for any purpose

The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters. The FLUXUS F601 is measurement ready in less than 5 minutes, including the measurement of the pipe wall thickness, the connection of the transducers to the transmitter, the parameterization of the flow meter and finally the mounting of the transducers. Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the F601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the F601 portable flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work. With its Li-Ion battery, the F601 allows for up to 14 hours of autonomous measurement. Matched and paired transducers as well as sophisticated algorithms care for the correction of pipe wall echoes and a wrong transducer positioning, thus ensuring reliable and highly accurate measurements - even during the most demanding application conditions. Due to the new HybridTrek mode, the portable flow meter can also reliably and accurately measure the liquid flow under conditions with a high content of solid particles or gaseous loads. The FLUXUS F601 portable clamp-on flow meter is also available in an "Energy" and "Multifunctional" version , allowing the measurement of  thermal energy / BTU flows andmaking the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.

FLUXUS F608

The world's only portable flow meter for hazardous areas

No More HOT Work Permits! The portable liquids Flowmeter for Hazardous Areas

The FLUXUS F608 portable flow meter for liquids is based on the widely used, highly reliable and versatile F601, but has been specifically engineered for its use within hazardous areas and is covered by an ATEX, IECEx and FM certification. Thus, users are not anymore obliged to obtain a Hot Work Permit, making the access toATEX, IECEx and FM Zones much easier and less time consuming.

Offering a high degree of flexibility, without compromising on Safety!

The extremely resistant carbon fiber housing, together with the rugged transducer design, ensures a high impact protection as well as resistance against oil, water and many other liquids. The F608 portable flow meter shares the same efficient battery management as the F601, offering over 14 hrs. of remote measurement time. Moreover, the measurement system can be fully set-up in less than five minutes due to the intuitive user guidance and the automatic transducer recognition. Its application range is unrivalled - from pipes as small as 6 mm up to 6500 mm inner diameter and temperatures ranging from -40°C to 200°C (with the WaveInjector solution even from -190°C up to 600°C).

The F608 goes where other portable devices can't

Being equipped with two flow channels, multiple In- and Outputs and an integrated data logger with a serial interface, the flowmeter is designed for direct usage in demanding environments, such as in the Upstream, Midstream and Downstream area as well as in the chemical and processing industries and the energy sector where its temperature inputs allow for the quantification of thermal energy flow rates.. As known from all FLEXIM flow meters, also the F608 portable flow meter features a highly precise bi-directional measurement at fast and even very slow flow rates over a wide dynamic measurement range and is not prone to temperature and zero drift, being fully compliant to ANSI/ASME regulations. However, the F608 is not only safe, accurate and reliable, but also very compact and lightweight, offering the user to even carry the complete measuring system as personal luggage for Offshore visits.

FLUXUS F721

Setting Standards in Clamp-on Ultrasonic Liquid Flow Measurement

The FLUXUS F721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of liquids. With its state-of-the-art hardware design and powerful digital signal processing it surpasses any other non-intrusive ultrasonic flowmeter in terms of accuracy, reliability and versatility. Highly sophisticated signal filters, faster than ever processing capacities and advanced measurement algorithms make the FLUXUS F721 liquid flow meter the standard setting measuring solution for any industrial application- even for the most challenging ones. The meter adapts itself automatically to the respective measurement conditions and compensates for flow profile disturbances such as beam dispersal and structure-borne noise, allowing for even more precise and reliable measurements. Extreme fast measurement cycles enable precise real time monitoring of highly dynamic processes.

Pushing the Boundaries

The FLUXUS F721 offers non-intrusive flow measurement of virtually any kind of liquid, from the smallest tubing to the largest penstock, independent of the pressure inside the pipe and over a very large temperature range. Due to its advanced technology, the measurement is unaffected by solid or gaseous entrainments and distinguishes itself by its unrivalled turndown ratio: Even low flows down to only a few liters per hour can be recorded accurately. Besides its advanced signal processing and evaluation technology, FLEXIM takes special care within the manufacturing process of the flow meter, ensuring highest precision and reliability. To achieve true zero point stability, FLEXIM carefully matches each ultrasonic transducer pair according to their individual characteristics. Due to unique transducer built-in temperature probes, the FLUXUS F721 automatically detects and compensates temperature differentials between pipe and transducer, ruling out measurement drift (ANSI/ASME MFC-5.1.-2011 regulations). Also, every transducer and transmitter is factory calibrated guaranteeing specified accuracies and ensuring highest traceability and flexibility. Furthermore, the FLUXUS F721 shares all common advantages of our FLUXUS clamp-on flow meters in terms of ease of installation, non-existent maintenance efforts and unrivalled cost-efficiency. As the flowmeter of choice for a very wide range of applications in virtually any industrial sector, the FLUXUS F721 is available with two different enclosure types: aluminium for standard applications and stainless steel for operation in hazardous and highly corrosive environments (ATEX, IECEx Zone 2 and FMc Class I, Div. 2 certified).

Ready for Industry 4.0

The FLUXUS F721 comes with all common communication protocols: HART, Modbus, Foundation Fieldbus, Profibus PA, BACnet and M-Bus allow bidirectional field communication and online diagnostics. The FLUXUS F721 is also one step ahead in terms of user guidance and diagnostics. It can be easily set-up and configured via USB. Its Ethernet connectivity provides additional bidirectional communication capabilities. Further value is added by the meters advanced selfmonitoring capabilities and the possibility of event driven data recording. The flow meter is permanently controlling the quality of the measurement. Such values, but also every other measurement data as well as externally fed in data, e.g. pressure and temperatues, can be chosen to trigger free defined meter functionalities. For instance, in case the quality of the measurement is falling below a predefined value, a temporary recording of high resolution measurement data can automatically be started. Such free configurable event based trigger functionality is not only perfectly suited for measurement diagnostics, but even more for the accurate monitoring of processes and especially the supervision and control of critical operations.

FLUXUS F808

Single channel flow meter for hazardous areas

Single channel clamp-on flow meter for hazardous areas - IECEX / ATEX Zone 1 approved

With the FLUXUS F808, FLEXIM presents a clamp-on flow meter for liquids with  IECEx / ATEX Zone 1 approval. From wellhead to refinery, the flows of crude oil and refined products need to be measured every step of the way. Harsh environments with corrosive atmospheres offshore or hot and dirty applications during crude oil refining require tough solutions. Also during chemical processing, media such as acids, caustics or highly viscous organic substances place enormous material and mechanical stress upon wetted flow measurement technologies. The highly rugged FLUXUS F808 with its flameproof housing and stainless steel transducers is suited for every industrial application. With its connection and electronic compartment being hermetically sealed, the FLUXUS F808 provides for a maximum of operational safety and is especially designed for usage in rough industrial environments such as in Chemical and Petrochemical plants. In conjunction with the extremely robust transducers and the  VARIOFIX transducer mounting fixture (Stainless Steel SS316 available),  which ensures a permanent contact pressure to the pipe wall and an extreme mechanical stability, the FLUXUS F808 is the most reliable ultrasonic clamp-on flow meter available. As the ultrasonic transducers are mounted on the outside of the pipe wall, the system does not suffer from wear, tear or clogging and can't be a risk for leaks. But the FLUXUS F808 is not only rugged – due to carefully matched and temperature compensated transducers (fully ANSI / ASME MFC 5M compliant) the FLUXUS F808 offers an unmatched zero stability. Highly innovative digital signal processing within the flow meter cares most reliable, repeatable and accurate bidirectional flow measurement over a wide turndown ratio. The FLUXUS F808 flow meter can be applied at inner pipe diameters ranging from 6 mm up to 6,5 m and more. Even liquid streams with a high content of solids or gas bubbles are not a problem due to the innovative HybridTrek mode and the unique signal processing implemented into the flow computer.

FLUXUS F809

The ultrasonic flow meter for operation in hazardous areas

The FLUXUS F809 is FLEXIM's dual channel ultrasonic clamp-on flow meter for bi-directional flow measurement of liquids in hazardous areas ( ATEX, IECEx Zone 1 and FM Class I, Div. 1 approved). With its flameproof housing and the corrosion resistant transducers residing outside the pipe wall, but inside the rugged VARIOFIX C mounting fixture, ensuring a permanent contact pressure and high mechanical stability, the FLUXUS F809 series is perfectly suited for every demanding industrial application. The connection and electronic compartment of the FLUXUS F809 is hermetically sealed, so that the measurement system provides maximum operational reliability and safety. Not only is the FLUXUS F809 rugged and reliable, it is precise. Thanks to carefully matched and temperature compensated transducers (fully ANSI / ASME MFC 5M compliant), the FLUXUS F809 offers an unmatched zero point stability and precise bi-directional flow measurement of virtually any liquid media - ranging from crude oil to refined products and chemical media - over an unlimited turndown range. The FLUXUS F809 flow meter can be applied at inner pipe diameters ranging from 6 mm up to 12000mm (no limitations on pipe wall thickness or material) and media temperatures from -190°C up to +600°C (by usage of the high temperature mounting fixture WaveInjector). With up to two measurement channels, the FLUXUS F809 flow meter can also be applied to difficult measurement points with non-ideal flow profiles. Even liquid streams with a high content of solids or gas bubbles are not a problem due to the innovative HybridTrek mode and the unique signal processing implemented into the flow computer.

FLUXUS G601

The Portable Gas flow meter

Portable gas flow metering without compromises

The FLUXUS G601 portable gas flow meter measures the flow of virtually any gas using FLEXIM's proven transit-time correlation technique. The ultrasonic transducers are simply clamped onto the outside of the pipe, thus no cutting into the pipe or process interruption is required for installation. The FLUXUS G601 portable gas flow meter allows for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can't be a risk for leaks and will not cause any pressure drops inside the pipe. It is the ideal tool for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed gas flow meters. Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the G601 was designed to easily withstand rough industrial environments. Besides itssturdy housing, the G601 portable gas flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work.

The FLUXUS G601 gas flow meter offers maximum flexibility

With its Li-Ion battery, the G601 allows for up to 14 hours of autonomous measurement. Due to its matched and paired transducers as well as the internal temperature compensation (compliant to ANSI/ASME) the measurement system is drift free and zero stable ensuring accurate readings. Moreover, as the transducer calibration data is automatically loaded by connecting the transducer to the transmitter, set-up times are reduced and precise, long-term stable results are provided. The portable gas flow meter can be applied at inner pipe diameters ranging from 6 mm up to 2100 mm (no limitations on pipe wall thickness or material) and media temperatures from -40°C up to 100°C. Moreover, the measurement system is independent of the pressure inside the pipe. With two measurement channels, the FLUXUS G601 portable gas flow meter can also be applied to difficult measurement points and is completely unaffected by gas density, viscosity and composition as well as temperature and pressure. Even wet gas up to Liquid Volume Fractions of 5% can be measured. Additionally the G601 can also be used for flow measurement of virtually any liquid media.Fur further information please consult the Technical Specifications of the F601 portable flow meter.

FLUXUS G721

Setting Standards in Clamp-on Ultrasonic Gas Flow Measurement

The FLUXUS G721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of gases. With its state-of-the-art hardware design and powerful digital signal processing it surpasses any other non-intrusive ultrasonic gas flowmeter in terms of accuracy, reliability and versatility. Highly sophisticated signal filters, faster than ever processing capacities and advanced measurement algorithms make the FLUXUS G721 gas flow meter the standard setting measuring solution for any industrial application - even for the most challenging ones. The meter adapts itself automatically to the respective measurement conditions and compensates for flow profile disturbances such as beam dispersal and structure-borne noise, allowing for even more precise and reliable measurements. Extreme fast measurement cycles enable precise real time monitoring of highly dynamic processes.

Pushing the Boundaries

The FLUXUS G721 offers non-intrusive flow measurement of virtually any kind of gas (from natural gas to process gases) over a wide pipe diameter range (from 6mm to more than 2m), independent of wall thickness, material and internal pressurization (no maximum pressure limitation and starting from as low as 3bar at steel lines and below atmospheric pressure at plastic pipes). Even hot gas up to +200°C isn't a challenge for the FLUXUS G721 gas flow meter. Besides its advanced signal processing and evaluation technology, FLEXIM takes special care within the manufacturing process of the flow meter, ensuring highest precision and reliability. To achieve true zero point stability, FLEXIM carefully matches each ultrasonic transducer pair according to their individual characteristics. Due to unique transducer built-in temperature probes, the FLUXUS G721 automatically detects and compensates temperature differentials between pipe and transducer, ruling out measurement drift (ANSI/ASME MFC-5.1.-2011 regulations). Also, every transducer and transmitter is factory calibrated guaranteeing specified accuracies and ensuring highest traceability and flexibility. Furthermore, the FLUXUS G721 shares all common advantages of our FLUXUS clamp-on flow meters in terms of ease of installation, non-existent maintenance efforts and unrivalled cost-efficiency. As the flowmeter of choice for a very wide range of applications in virtually any industrial sector, the FLUXUS G721 is available with two different enclosure types: aluminium for standard applications and stainless steel for operation in hazardous and highly corrosive environments (ATEX / IECEx Zone 2 and FMc Class I, Div. 2 certified).

Ready for Industry 4.0

The FLUXUS F721 comes with all common communication protocols: HART, Modbus, Foundation Fieldbus, Profibus PA, BACnet and M-Bus allow bidirectional field communication and online diagnostics. The FLUXUS F721 is also one step ahead in terms of user guidance and diagnostics. It can be easily set-up and configured via USB. Its Ethernet connectivity provides additional bidirectional communication capabilities. Further value is added by the meters advanced selfmonitoring capabilities and the possibility of event driven data recording. The flow meter is permanently controlling the quality of the measurement. Such values, but also every other measurement data as well as externally fed in data, e.g. pressure and temperatues, can be chosen to trigger free defined meter functionalities. For instance, in case the quality of the measurement is falling below a predefined value, a temporary recording of high resolution measurement data can automatically be started. Such free configurable event based trigger functionality is not only perfectly suited for measurement diagnostics, but even more for the accurate monitoring of processes as well as the supervision and control of critical operations.

FLUXUS G809

Permanent Gas Flow Meter for Hazardous Areas

The ultrasonic gas flow meter for operation in hazardous areas

The FLUXUS G809 is FLEXIM's dual channel ultrasonic clamp-on flow meter for bi-directional flow measurement of gases in hazardous areas ( ATEX, IECEx Zone 1 and FM Class I, Div. 1 / 2 approved). With its flameproof housing and the corrosion resistant transducers residing inside the rugged VARIOFIX C mounting fixture, ensuring a permanent contact pressure and high mechanical stability, the FLUXUS G809 series is perfectly suited for every demanding industrial application. The FLUXUS G809 gas flow meter allows for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can't be a risk for leaks and will not cause any pressure drops inside the pipe. Due to its matched and paired transducers as well as the internal temperature compensation (compliant to ANSI/ASME) the measurement system is drift free and zero stable ensuring accurate readings. The gas flow meter can be applied at inner pipe diameters ranging from 6 mm up to 2100 mm (with no limitations on pipe wall thickness or material) and media temperatures from -40°C up to 100°C. With up to two measurement channels, the FLUXUS G809 permanent gas flow meter can also be applied to difficult measurement points and is completely unaffected by gas density, viscosity and composition as well as temperature and pressure.  Even wet gas up to Liquid Volume Fractions of 5% can be measured.